configure.ac:19: installing 'config/autoconf/compile'
configure.ac:9: installing 'config/autoconf/config.guess'
configure.ac:9: installing 'config/autoconf/config.sub'
configure.ac:22: installing 'config/autoconf/install-sh'
configure.ac:22: installing 'config/autoconf/missing'
GNUmakefile.am: installing 'config/autoconf/depcomp'
100%100%100%Done
can-utils-2021.08.0/
can-utils-2021.08.0/.github/
can-utils-2021.08.0/.github/workflows/
can-utils-2021.08.0/.github/workflows/autotools.yml
can-utils-2021.08.0/.gitignore
can-utils-2021.08.0/.travis.yml
can-utils-2021.08.0/Android.mk
can-utils-2021.08.0/CMakeLists.txt
can-utils-2021.08.0/GNUmakefile.am
can-utils-2021.08.0/LICENSES/
can-utils-2021.08.0/LICENSES/BSD-3-Clause
can-utils-2021.08.0/LICENSES/GPL-2.0-only.txt
can-utils-2021.08.0/LICENSES/Linux-syscall-note.txt
can-utils-2021.08.0/Makefile
can-utils-2021.08.0/README.md
can-utils-2021.08.0/asc2log.c
can-utils-2021.08.0/autogen.sh
can-utils-2021.08.0/bcmserver.c
can-utils-2021.08.0/can-calc-bit-timing.c
can-utils-2021.08.0/can-j1939-install-kernel-module.md
can-utils-2021.08.0/can-j1939-kickstart.md
can-utils-2021.08.0/can-j1939.md
can-utils-2021.08.0/canbusload.c
can-utils-2021.08.0/candump.c
can-utils-2021.08.0/canfdtest.c
can-utils-2021.08.0/canframelen.c
can-utils-2021.08.0/canframelen.h
can-utils-2021.08.0/cangen.c
can-utils-2021.08.0/cangw.c
can-utils-2021.08.0/canlogserver.c
can-utils-2021.08.0/canplayer.c
can-utils-2021.08.0/cansend.c
can-utils-2021.08.0/cansequence.c
can-utils-2021.08.0/cansniffer.c
can-utils-2021.08.0/cmake/
can-utils-2021.08.0/cmake/make_uninstall.cmake
can-utils-2021.08.0/config/
can-utils-2021.08.0/config/m4/
can-utils-2021.08.0/config/m4/.secret-world-domination-project
can-utils-2021.08.0/configure.ac
can-utils-2021.08.0/include/
can-utils-2021.08.0/include/linux/
can-utils-2021.08.0/include/linux/can.h
can-utils-2021.08.0/include/linux/can/
can-utils-2021.08.0/include/linux/can/bcm.h
can-utils-2021.08.0/include/linux/can/error.h
can-utils-2021.08.0/include/linux/can/gw.h
can-utils-2021.08.0/include/linux/can/isotp.h
can-utils-2021.08.0/include/linux/can/j1939.h
can-utils-2021.08.0/include/linux/can/netlink.h
can-utils-2021.08.0/include/linux/can/raw.h
can-utils-2021.08.0/include/linux/can/vxcan.h
can-utils-2021.08.0/include/linux/errqueue.h
can-utils-2021.08.0/include/linux/kernel.h
can-utils-2021.08.0/include/linux/net_tstamp.h
can-utils-2021.08.0/include/linux/netlink.h
can-utils-2021.08.0/isotpdump.c
can-utils-2021.08.0/isotpperf.c
can-utils-2021.08.0/isotprecv.c
can-utils-2021.08.0/isotpsend.c
can-utils-2021.08.0/isotpserver.c
can-utils-2021.08.0/isotpsniffer.c
can-utils-2021.08.0/isotptun.c
can-utils-2021.08.0/j1939acd.c
can-utils-2021.08.0/j1939cat.c
can-utils-2021.08.0/j1939spy.c
can-utils-2021.08.0/j1939sr.c
can-utils-2021.08.0/lib.c
can-utils-2021.08.0/lib.h
can-utils-2021.08.0/libj1939.c
can-utils-2021.08.0/libj1939.h
can-utils-2021.08.0/log2asc.c
can-utils-2021.08.0/log2long.c
can-utils-2021.08.0/mcp251xfd/
can-utils-2021.08.0/mcp251xfd/99-devcoredump.rules
can-utils-2021.08.0/mcp251xfd/devcoredump
can-utils-2021.08.0/mcp251xfd/mcp251xfd-dev-coredump.c
can-utils-2021.08.0/mcp251xfd/mcp251xfd-dump-userspace.h
can-utils-2021.08.0/mcp251xfd/mcp251xfd-dump.c
can-utils-2021.08.0/mcp251xfd/mcp251xfd-dump.h
can-utils-2021.08.0/mcp251xfd/mcp251xfd-main.c
can-utils-2021.08.0/mcp251xfd/mcp251xfd-regmap.c
can-utils-2021.08.0/mcp251xfd/mcp251xfd.h
can-utils-2021.08.0/page.theme
can-utils-2021.08.0/slcan_attach.c
can-utils-2021.08.0/slcand.c
can-utils-2021.08.0/slcanpty.c
can-utils-2021.08.0/style.css
can-utils-2021.08.0/terminal.h
can-utils-2021.08.0/testj1939.c

----------
autoreconf
----------

libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'config/autoconf'.
libtoolize: copying file 'config/autoconf/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'config/m4'.
libtoolize: copying file 'config/m4/libtool.m4'
libtoolize: copying file 'config/m4/ltoptions.m4'
libtoolize: copying file 'config/m4/ltsugar.m4'
libtoolize: copying file 'config/m4/ltversion.m4'
libtoolize: copying file 'config/m4/lt~obsolete.m4'
libtoolize: Consider adding '-I config/m4' to ACLOCAL_AMFLAGS in Makefile.am.

--------
Finished
--------

checking build system type... i586-slackware-linux-gnu
checking host system type... i586-slackware-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert i586-slackware-linux-gnu file names to i586-slackware-linux-gnu format... func_convert_file_noop
checking how to convert i586-slackware-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking for gawk... gawk
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether make supports nested variables... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking termios.h usability... yes
checking termios.h presence... yes
checking for termios.h... yes
checking for unistd.h... (cached) yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for inline... inline
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking for off_t... yes
checking for pid_t... yes
checking for uint64_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking for sys/time.h... (cached) yes
checking for unistd.h... (cached) yes
checking for alarm... yes
checking for working mktime... yes
checking for alarm... (cached) yes
checking for gettimeofday... yes
checking for localtime_r... yes
checking for memset... yes
checking for select... yes
checking for setlocale... yes
checking for socket... yes
checking for strchr... yes
checking for strerror... yes
checking for strstr... yes
checking for strtoul... yes
checking for library containing clock_nanosleep... none required
checking whether SO_RXQ_OVFL is declared... no
checking whether PF_CAN is declared... no
checking whether AF_CAN is declared... no
checking whether N_SLCAN is declared... no
checking whether SCM_TIMESTAMPING_OPT_STATS is declared... no
checking whether to enable debugging... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating GNUmakefile
config.status: executing libtool commands
config.status: executing depfiles commands
  CC       asc2log.o
  CC       lib.lo
  CC       canframelen.lo
  CCLD     libcan.la
  CCLD     asc2log
  CC       bcmserver.o
  CCLD     bcmserver
  CC       can-calc-bit-timing.o
  CCLD     can-calc-bit-timing
  CC       canbusload.o
  CCLD     canbusload
  CC       candump.o
  CCLD     candump
  CC       canfdtest.o
  CCLD     canfdtest
  CC       cangen.o
  CCLD     cangen
  CC       cangw.o
  CCLD     cangw
  CC       canlogserver.o
  CCLD     canlogserver
  CC       canplayer.o
  CCLD     canplayer
  CC       cansend.o
  CCLD     cansend
  CC       cansequence.o
  CCLD     cansequence
  CC       cansniffer.o
  CCLD     cansniffer
  CC       isotpdump.o
  CCLD     isotpdump
  CC       isotpperf.o
  CCLD     isotpperf
  CC       isotprecv.o
  CCLD     isotprecv
  CC       isotpsend.o
  CCLD     isotpsend
  CC       isotpserver.o
  CCLD     isotpserver
  CC       isotpsniffer.o
  CCLD     isotpsniffer
  CC       isotptun.o
  CCLD     isotptun
  CC       j1939acd.o
  CC       libj1939.lo
  CCLD     libj1939.la
  CCLD     j1939acd
  CC       j1939cat.o
  CCLD     j1939cat
  CC       j1939spy.o
  CCLD     j1939spy
  CC       j1939sr.o
  CCLD     j1939sr
  CC       log2asc.o
  CCLD     log2asc
  CC       log2long.o
  CCLD     log2long
  CC       mcp251xfd/mcp251xfd-dev-coredump.o
  CC       mcp251xfd/mcp251xfd-dump.o
  CC       mcp251xfd/mcp251xfd-main.o
  CC       mcp251xfd/mcp251xfd-regmap.o
  CCLD     mcp251xfd-dump
  CC       slcan_attach.o
  CCLD     slcan_attach
  CC       slcand.o
  CCLD     slcand
  CC       slcanpty.o
  CCLD     slcanpty
  CC       testj1939.o
  CCLD     testj1939
if test -z 'strip'; then \
  make  INSTALL_PROGRAM="/bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s" \
    install_sh_PROGRAM="/bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s" INSTALL_STRIP_FLAG=-s \
      install; \
else \
  make  INSTALL_PROGRAM="/bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s" \
    install_sh_PROGRAM="/bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s" INSTALL_STRIP_FLAG=-s \
    "INSTALL_PROGRAM_ENV=STRIPPROG='strip'" install; \
fi
make[1]: Entering directory '/usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0'
make[2]: Entering directory '/usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0'
 /usr/bin/mkdir -p '/usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin'
 STRIPPROG='strip' /bin/sh ./libtool   --mode=install /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s asc2log bcmserver can-calc-bit-timing canbusload candump canfdtest cangen cangw canlogserver canplayer cansend cansequence cansniffer isotpdump isotpperf isotprecv isotpsend isotpserver isotpsniffer isotptun j1939acd j1939cat j1939spy j1939sr log2asc log2long mcp251xfd-dump slcan_attach slcand slcanpty testj1939 '/usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin'
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s asc2log /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/asc2log
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s bcmserver /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/bcmserver
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s can-calc-bit-timing /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/can-calc-bit-timing
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s canbusload /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/canbusload
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s candump /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/candump
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s canfdtest /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/canfdtest
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s cangen /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/cangen
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s cangw /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/cangw
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s canlogserver /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/canlogserver
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s canplayer /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/canplayer
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s cansend /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/cansend
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s cansequence /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/cansequence
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s cansniffer /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/cansniffer
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s isotpdump /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/isotpdump
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s isotpperf /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/isotpperf
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s isotprecv /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/isotprecv
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s isotpsend /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/isotpsend
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s isotpserver /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/isotpserver
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s isotpsniffer /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/isotpsniffer
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s isotptun /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/isotptun
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s j1939acd /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/j1939acd
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s j1939cat /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/j1939cat
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s j1939spy /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/j1939spy
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s j1939sr /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/j1939sr
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s log2asc /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/log2asc
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s log2long /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/log2long
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s mcp251xfd-dump /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/mcp251xfd-dump
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s slcan_attach /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/slcan_attach
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s slcand /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/slcand
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s slcanpty /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/slcanpty
libtool: install: /bin/sh /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0/config/autoconf/install-sh -c -s testj1939 /usr/src/slapt-src-i486/system/can-utils/package-can-utils/usr/bin/testj1939
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0'
make[1]: Leaving directory '/usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0'

Slackware package maker, version 3.14159265.

Searching for symbolic links:

No symbolic links were found, so we won't make an installation script.
You can make your own later in ./install/doinst.sh and rebuild the
package if you like.

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n

Creating Slackware package:  /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0-i586-1salix15.0.txz

./
install/
install/slack-desc
usr/
usr/bin/
usr/bin/asc2log
usr/bin/bcmserver
usr/bin/can-calc-bit-timing
usr/bin/canbusload
usr/bin/candump
usr/bin/canfdtest
usr/bin/cangen
usr/bin/cangw
usr/bin/canlogserver
usr/bin/canplayer
usr/bin/cansend
usr/bin/cansequence
usr/bin/cansniffer
usr/bin/isotpdump
usr/bin/isotpperf
usr/bin/isotprecv
usr/bin/isotpsend
usr/bin/isotpserver
usr/bin/isotpsniffer
usr/bin/isotptun
usr/bin/j1939acd
usr/bin/j1939cat
usr/bin/j1939spy
usr/bin/j1939sr
usr/bin/log2asc
usr/bin/log2long
usr/bin/mcp251xfd-dump
usr/bin/slcan_attach
usr/bin/slcand
usr/bin/slcanpty
usr/bin/testj1939
usr/doc/
usr/doc/can-utils-2021.08.0/
usr/doc/can-utils-2021.08.0/README.md
usr/doc/can-utils-2021.08.0/can-utils.SlackBuild

Slackware package /usr/src/slapt-src-i486/system/can-utils/can-utils-2021.08.0-i586-1salix15.0.txz created.

Installing package can-utils-2021.08.0-i586-1salix15.0...
| can-utils (SocketCAN userspace utilities and tools)
| 
| contains some userspace utilities for Linux CAN subsystem (aka
| SocketCAN): candump, canplayer, cansend, cangen, cansniffer,
| canlogserver, bcmserver, socketcand, cangw, canbusload, canfdtest
| can-calc-bit-timing, isotpsend, isotprecv, isotpsniffer, isotpdump,
| isotpserver, isotpperf, isotptun, asc2log, log2asc, log2long,
| slcan_attach, slcand, slcanpty
| 
| 
| 
| 
|