The following packages will be installed:
 xwax 
Fetching README...  0%100%100%100%100%100%Done
Fetching setcap.sh...  0%100%100%100%100%100%Done
Fetching slack-desc...  0%100%100%100%100%100%Done
Fetching xwax.SlackBuild...  0%100%100%100%100%100%Done
Fetching xwax.info...  0%100%100%100%100%100%Done
xwax-1.6/
xwax-1.6/.gitignore
xwax-1.6/CHANGES
xwax-1.6/COPYING
xwax-1.6/INSTALL
xwax-1.6/Makefile
xwax-1.6/README
xwax-1.6/alsa.c
xwax-1.6/alsa.h
xwax-1.6/configure
xwax-1.6/controller.c
xwax-1.6/controller.h
xwax-1.6/cues.c
xwax-1.6/cues.h
xwax-1.6/debug.h
xwax-1.6/deck.c
xwax-1.6/deck.h
xwax-1.6/device.c
xwax-1.6/device.h
xwax-1.6/dicer.c
xwax-1.6/dicer.h
xwax-1.6/dummy.c
xwax-1.6/dummy.h
xwax-1.6/excrate.c
xwax-1.6/excrate.h
xwax-1.6/external.c
xwax-1.6/external.h
xwax-1.6/import
xwax-1.6/index.c
xwax-1.6/index.h
xwax-1.6/interface.c
xwax-1.6/interface.h
xwax-1.6/jack.c
xwax-1.6/jack.h
xwax-1.6/layout.h
xwax-1.6/library.c
xwax-1.6/library.h
xwax-1.6/list.h
xwax-1.6/listbox.c
xwax-1.6/listbox.h
xwax-1.6/lut.c
xwax-1.6/lut.h
xwax-1.6/midi.c
xwax-1.6/midi.h
xwax-1.6/mkdist
xwax-1.6/mktimecode.c
xwax-1.6/mkversion
xwax-1.6/mutex.h
xwax-1.6/observer.h
xwax-1.6/oss.c
xwax-1.6/oss.h
xwax-1.6/pitch.h
xwax-1.6/player.c
xwax-1.6/player.h
xwax-1.6/realtime.c
xwax-1.6/realtime.h
xwax-1.6/rig.c
xwax-1.6/rig.h
xwax-1.6/scan
xwax-1.6/selector.c
xwax-1.6/selector.h
xwax-1.6/spin.h
xwax-1.6/status.c
xwax-1.6/status.h
xwax-1.6/tests/
xwax-1.6/tests/cues.c
xwax-1.6/tests/external.c
xwax-1.6/tests/library.c
xwax-1.6/tests/midi.c
xwax-1.6/tests/observer.c
xwax-1.6/tests/scan-bpm
xwax-1.6/tests/status.c
xwax-1.6/tests/timecoder.c
xwax-1.6/tests/track.c
xwax-1.6/tests/ttf.c
xwax-1.6/thread.c
xwax-1.6/thread.h
xwax-1.6/timecoder.c
xwax-1.6/timecoder.h
xwax-1.6/track.c
xwax-1.6/track.h
xwax-1.6/xwax.1
xwax-1.6/xwax.c
xwax-1.6/xwax.h
xwax-1.6/.version
ALSA enabled
JACK enabled
OSS disabled
Be sure to run 'make clean' if you have changed the configuration.
Run 'make' to compile xwax.
./mkversion -r
cc -O2 -fPIC -Wall `sdl-config --cflags` -MMD -DWITH_ALSA -DWITH_JACK -DEXECDIR=\"/usr/libexec\" -DVERSION=\"1.6\"  -c -o xwax.o xwax.c
cc -O2 -fPIC -Wall -MMD  -c -o controller.o controller.c
cc -O2 -fPIC -Wall -MMD  -c -o cues.o cues.c
cc -O2 -fPIC -Wall -MMD  -c -o deck.o deck.c
cc -O2 -fPIC -Wall -MMD  -c -o device.o device.c
cc -O2 -fPIC -Wall -MMD  -c -o dummy.o dummy.c
cc -O2 -fPIC -Wall -MMD  -c -o excrate.o excrate.c
cc -O2 -fPIC -Wall -MMD  -c -o external.o external.c
cc -O2 -fPIC -Wall -MMD  -c -o index.o index.c
cc -O2 -fPIC -Wall `sdl-config --cflags` -MMD  -c -o interface.o interface.c
interface.c: In function ‘draw_clock’:
interface.c:211:29: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=]
  211 |     sprintf(buf, "%02d:%02d.", minutes, seconds);
      |                             ^
interface.c:211:5: note: ‘sprintf’ output between 7 and 9 bytes into a destination of size 8
  211 |     sprintf(buf, "%02d:%02d.", minutes, seconds);
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc -O2 -fPIC -Wall -MMD  -c -o library.o library.c
cc -O2 -fPIC -Wall -MMD  -c -o listbox.o listbox.c
cc -O2 -fPIC -Wall -MMD  -c -o lut.o lut.c
cc -O2 -fPIC -Wall -MMD  -c -o player.o player.c
cc -O2 -fPIC -Wall -MMD  -c -o realtime.o realtime.c
cc -O2 -fPIC -Wall -MMD  -c -o rig.o rig.c
cc -O2 -fPIC -Wall -MMD  -c -o selector.o selector.c
cc -O2 -fPIC -Wall -MMD  -c -o status.o status.c
cc -O2 -fPIC -Wall -MMD  -c -o thread.o thread.c
cc -O2 -fPIC -Wall -MMD  -c -o timecoder.o timecoder.c
cc -O2 -fPIC -Wall -MMD  -c -o track.o track.c
cc -O2 -fPIC -Wall -MMD  -c -o alsa.o alsa.c
cc -O2 -fPIC -Wall -MMD  -c -o dicer.o dicer.c
cc -O2 -fPIC -Wall -MMD  -c -o midi.o midi.c
cc -O2 -fPIC -Wall -MMD  -c -o jack.o jack.c
cc -O2 -fPIC -pthread  xwax.o controller.o cues.o deck.o device.o dummy.o excrate.o external.o index.o interface.o library.o listbox.o lut.o player.o realtime.o rig.o selector.o status.o thread.o timecoder.o track.o alsa.o dicer.o midi.o jack.o  `sdl-config --libs` -lSDL_ttf -lasound -ljack -lm -o xwax
cc -O2 -fPIC -Wall -MMD  -c -o mktimecode.o mktimecode.c
cc -O2 -fPIC  mktimecode.o  -lm -o mktimecode
cc -O2 -fPIC -Wall -MMD -I.  -c -o tests/cues.o tests/cues.c
cc -O2 -fPIC  tests/cues.o cues.o   -o tests/cues
cc -O2 -fPIC -Wall -MMD -I.  -c -o tests/external.o tests/external.c
cc -O2 -fPIC  tests/external.o external.o   -o tests/external
cc -O2 -fPIC -Wall -MMD -I.  -c -o tests/library.o tests/library.c
cc -O2 -fPIC -pthread  tests/library.o excrate.o external.o index.o library.o rig.o status.o thread.o track.o   -o tests/library
cc -O2 -fPIC -Wall -MMD -I.  -c -o tests/observer.o tests/observer.c
cc -O2 -fPIC  tests/observer.o   -o tests/observer
cc -O2 -fPIC -Wall -MMD -I.  -c -o tests/status.o tests/status.c
cc -O2 -fPIC  tests/status.o status.o   -o tests/status
cc -O2 -fPIC -Wall -MMD -I.  -c -o tests/timecoder.o tests/timecoder.c
cc -O2 -fPIC  tests/timecoder.o lut.o timecoder.o   -o tests/timecoder
cc -O2 -fPIC -Wall -MMD -I.  -c -o tests/track.o tests/track.c
cc -O2 -fPIC -pthread  tests/track.o excrate.o external.o index.o library.o rig.o status.o thread.o track.o  -lm -o tests/track
cc -O2 -fPIC -Wall `sdl-config --cflags` -MMD -I.  -c -o tests/ttf.o tests/ttf.c
cc -O2 -fPIC  tests/ttf.o  `sdl-config --libs` -lSDL_ttf -o tests/ttf
install -D xwax /usr/src/slapt-src/audio/xwax/package-xwax/usr/bin/xwax
install -D scan /usr/src/slapt-src/audio/xwax/package-xwax/usr/libexec/xwax-scan
install -D import /usr/src/slapt-src/audio/xwax/package-xwax/usr/libexec/xwax-import
install -D -m 0644 xwax.1 /usr/src/slapt-src/audio/xwax/package-xwax/usr/man/man1/xwax.1
install -D -m 0644 CHANGES /usr/src/slapt-src/audio/xwax/package-xwax/usr/doc/xwax/CHANGES
install -D -m 0644 COPYING /usr/src/slapt-src/audio/xwax/package-xwax/usr/doc/xwax/COPYING
install -D -m 0644 README /usr/src/slapt-src/audio/xwax/package-xwax/usr/doc/xwax/README

Slackware package maker, version 3.14159265.

Searching for symbolic links:

No symbolic links were found, so we won't make an installation script.
You can make your own later in ./install/doinst.sh and rebuild the
package if you like.

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n

Creating Slackware package:  /usr/src/slapt-src/audio/xwax/xwax-1.6-x86_64-1salix15.0.txz

./
install/
install/doinst.sh
install/slack-desc
usr/
usr/bin/
usr/bin/xwax
usr/doc/
usr/doc/xwax/
usr/doc/xwax-1.6/
usr/doc/xwax-1.6/xwax.SlackBuild
usr/doc/xwax/CHANGES
usr/doc/xwax/COPYING
usr/doc/xwax/README
usr/libexec/
usr/libexec/xwax-import
usr/libexec/xwax-scan
usr/man/
usr/man/man1/
usr/man/man1/xwax.1.gz

Slackware package /usr/src/slapt-src/audio/xwax/xwax-1.6-x86_64-1salix15.0.txz created.

Installing package xwax-1.6-x86_64-1salix15.0...
| xwax (Digital Vinyl System)
| 
| xwax is an open-source Digital Vinyl System (DVS) for Linux.
| It allows DJs and turntablists to playback digital audio
| files (MP3, Ogg Vorbis, FLAC, AAC and more), controlled using a
| normal pair of turntables via timecoded vinyls.
| 
| Homepage: http://xwax.org/
| 
| 
| 
| 
|