The following packages will be installed:
 perl-IO-Tty 
Fetching README...  0%100%100%100%100%100%Done
Fetching perl-IO-Tty.SlackBuild...  0%100%100%100%100%100%Done
Fetching perl-IO-Tty.info...  0%100%100%100%100%100%Done
Fetching slack-desc...  0%100%100%100%100%100%Done
IO-Tty-1.12/
IO-Tty-1.12/ChangeLog
IO-Tty-1.12/Makefile.PL
IO-Tty-1.12/MANIFEST
IO-Tty-1.12/META.json
IO-Tty-1.12/META.yml
IO-Tty-1.12/Pty.pm
IO-Tty-1.12/README
IO-Tty-1.12/t/
IO-Tty-1.12/try
IO-Tty-1.12/Tty.pm
IO-Tty-1.12/Tty.xs
IO-Tty-1.12/t/test.t
Now let's see what we can find out about your system
(logfiles of failing tests are available in the conf/ dir)...
Looking for _getpty()...... not found.
Looking for getpt()........ FOUND.
Looking for grantpt()...... FOUND.
Looking for openpty()...... FOUND.
Looking for posix_openpt(). FOUND.
Looking for ptsname()...... FOUND.
Looking for ptsname_r().... FOUND.
Looking for sigaction().... FOUND.
Looking for strlcpy()...... not found.
Looking for ttyname()...... FOUND.
Looking for unlockpt()..... FOUND.
Looking for libutil.h...... not found.
Looking for pty.h.......... FOUND.
Looking for sys/pty.h...... not found.
Looking for sys/ptyio.h.... not found.
Looking for sys/stropts.h.. FOUND.
Looking for termio.h....... FOUND.
Looking for termios.h...... FOUND.
Looking for util.h......... not found.
Checking which symbols compile OK...
(sorry for the tedious check, but some systems have not too clean
 header files, to say the least;  '+' means OK, '-' means not defined
 and '*' has compile problems...)
+B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 -B76800 +B9600 +BRKINT +BS0 +BS1 +BSDLY +CBAUD -CBAUDEXT +CBRK -CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH +CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT +CR0 +CR1 +CR2 +CR3 +CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF -CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB +FF0 +FF1 +FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP +IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS +NL0 +NL1 +NLDLY +NOFLSH +OCRNL +OFDEL +OFILL +OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG +TAB0 +TAB1 +TAB2 +TAB3 +TABDLY -TCDSET +TCFLSH +TCGETA +TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW +TCSBRK +TCSETA +TCSETAF +TCSETAW -TCSETCTTY +TCSETS +TCSETSF +TCSETSW +TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK -TIOCCDTR +TIOCCONS +TIOCEXCL -TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID +TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ -TIOCREMOTE +TIOCSBRK +TIOCSCTTY -TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID +TIOCSSOFTCAR -TIOCSTART +TIOCSTI -TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD -VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH +VT0 +VT1 +VTDLY +VTIME +VWERASE -WRAP +XCASE -XCLUDE -XMT1EN +XTABS 

>>> Configuration looks good! <<<

Writing IO::Tty::Constant.pm...
DEFINE = -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_SYS_STROPTS_H -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for IO::Tty
Writing MYMETA.yml and MYMETA.json
cp Pty.pm blib/lib/IO/Pty.pm
cp Tty/Constant.pm blib/lib/IO/Tty/Constant.pm
cp Tty.pm blib/lib/IO/Tty.pm
Running Mkbootstrap for IO::Tty ()
chmod 644 "Tty.bs"
"/usr/bin/perl5.22.2" "/usr/share/perl5/ExtUtils/xsubpp"  -typemap "/usr/share/perl5/ExtUtils/typemap"  Tty.xs > Tty.xsc && mv Tty.xsc Tty.c
cc -c   -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -fPIC   -DVERSION=\"1.12\" -DXS_VERSION=\"1.12\" -fPIC "-I/usr/lib64/perl5/CORE"  -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_SYS_STROPTS_H -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Tty.c
rm -f blib/arch/auto/IO/Tty/Tty.so
cc  -shared -O2 -fPIC -L/usr/local/lib -fstack-protector-strong Tty.o  -o blib/arch/auto/IO/Tty/Tty.so 	\
   -lutil  	\
  
chmod 755 blib/arch/auto/IO/Tty/Tty.so
"/usr/bin/perl5.22.2" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644
Manifying 3 pod documents
Running Mkbootstrap for IO::Tty ()
chmod 644 "Tty.bs"
PERL_DL_NONLAZY=1 "/usr/bin/perl5.22.2" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Configuration: -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_SYS_STROPTS_H -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT
# Checking for appropriate ioctls:
# TIOCNOTTY
# TIOCSCTTY
trying posix_openpt()...
trying grantpt()...
trying unlockpt()...
trying ptsname_r()...
trying to open /dev/pts/12...
trying to I_PUSH ptem...
trying to I_PUSH ldterm...
trying to I_PUSH ttcompat...
#  === Checking if child gets pty as controlling terminal
trying posix_openpt()...
trying grantpt()...
trying unlockpt()...
trying ptsname_r()...
trying to open /dev/pts/12...
trying to I_PUSH ptem...
trying to I_PUSH ldterm...
trying to I_PUSH ttcompat...

WARNING: when the client closes the slave pty, the master gets an error
(undef return value and $! eq "Input/output error")
instead of EOF (0 return value).  Please be sure to handle this 
in your application (Expect already does).

# Checking basic functionality and how your ptys handle large strings...
#   This test may hang on certain systems, even though it is protected
#   by alarm().  If the counter stops, try Ctrl-C, the test should continue.
trying posix_openpt()...
trying grantpt()...
trying unlockpt()...
trying ptsname_r()...
trying to open /dev/pts/12...
trying to I_PUSH ptem...
trying to I_PUSH ldterm...
trying to I_PUSH ttcompat...
# isatty($master): YES
# isatty($slave): YES
# Child PID = 19291
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
# Good, your raw ptys can handle at least 530 bytes at once.
Slave got EOF at line 530, byte 0.
t/test.t .. ok
All tests successful.
Files=1, Tests=5,  6 wallclock secs ( 0.12 usr  0.05 sys +  1.01 cusr  0.42 csys =  1.60 CPU)
Result: PASS
Manifying 3 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/lib64/perl5/vendor_perl/auto/IO/Tty/Tty.so
Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/lib64/perl5/vendor_perl/IO/Tty.pm
Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/lib64/perl5/vendor_perl/IO/Pty.pm
Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/lib64/perl5/vendor_perl/IO/Tty/Constant.pm
Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/man/man3/IO::Tty.3
Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/man/man3/IO::Tty::Constant.3
Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/man/man3/IO::Pty.3
Appending installation info to /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/lib64/perl5/perllocal.pod

Slackware package maker, version 3.141593.

Searching for symbolic links:

No symbolic links were found, so we won't make an installation script.
You can make your own later in ./install/doinst.sh and rebuild the
package if you like.

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n

Creating Slackware package:  /usr/src/slapt-src/perl/perl-IO-Tty/perl-IO-Tty-1.12-x86_64-1salix.txz

./
usr/
usr/doc/
usr/doc/perl-IO-Tty-1.12/
usr/doc/perl-IO-Tty-1.12/README
usr/doc/perl-IO-Tty-1.12/ChangeLog
usr/doc/perl-IO-Tty-1.12/perl-IO-Tty.SlackBuild
usr/lib64/
usr/lib64/perl5/
usr/lib64/perl5/vendor_perl/
usr/lib64/perl5/vendor_perl/auto/
usr/lib64/perl5/vendor_perl/auto/IO/
usr/lib64/perl5/vendor_perl/auto/IO/Tty/
usr/lib64/perl5/vendor_perl/auto/IO/Tty/Tty.so
usr/lib64/perl5/vendor_perl/IO/
usr/lib64/perl5/vendor_perl/IO/Tty/
usr/lib64/perl5/vendor_perl/IO/Tty/Constant.pm
usr/lib64/perl5/vendor_perl/IO/Tty.pm
usr/lib64/perl5/vendor_perl/IO/Pty.pm
usr/man/
usr/man/man3/
usr/man/man3/IO::Tty::Constant.3.gz
usr/man/man3/IO::Pty.3.gz
usr/man/man3/IO::Tty.3.gz
install/
install/slack-desc

Slackware package /usr/src/slapt-src/perl/perl-IO-Tty/perl-IO-Tty-1.12-x86_64-1salix.txz created.

Installing package perl-IO-Tty-1.12-x86_64-1salix...
| perl-IO-Tty (Pseudo TTY object class)
| 
| Perl extension that provides an interface to allow the creation of a
| pseudo tty.
| 
| 
| 
| 
| 
| 
| 
| 
|